CUSTOMER

Data room

Details
XGPC Ver 1.3.0.0 [EN]
Date : 2013.10.15Hit : 4563
File XGPC_v1.3_ENG_Build2013-10-14.exe

XGPC v1.3 New Feature

This section provides information that has been added to the new release of XGPC. This includes the following:

  • Change a Communication Driver in XGPC.
  • Change a Project Tree in XGPC.

  • Support the X8-M Series A FRN4.
  • Additional Inline Indirect Address Translation feature.
  • - f option in BCC for the communication with CSD5 Servo Driver
    - CRC.7
    - CRC.8ct
    - CRC.8mx for the communication with Autonics MP5 Series
    - CRC.16dnp3
  • Add MSG Done ACK bit.
  • Added SR2.3.3, Always OFF Bit.
  • Added Modbus Consecutive Memory Address feature for Modbus Extended Holding register
  • Add Change IP to Static feature

  • Added counters for ASCII/Binary driver.
  • Add Socket MSG Diagnostic Info.
  • Changed default Ethernet MSG Connection Timeout from 1500 to 300 in msecs
  • Show Number Of Expansion I/O Attached in SR2.92

This section provides information on issues that have been resolved with the latest release of XGPC. This includes the following:

  • Corrected lbl & jmp instruction err in OLE
  • Fixed offline operation when XGPC reading CS0 or PTO0
  • Corrected 32bit configuration of MSG instruction
  • Save CS and ES Data tables in online save.

  • Corrected 28h System Fault while Indirect Addressing is used with large Data Table memory.(X8-M Series A FRN 4)

  • Ethernet port may be locked up while large Ping packets are received.(X8-M Series A FRN 3)
  • Added to check Read or Write data table in a Socket MSG instruction. This may cause 5h fault according to XGPC software.(X8-M Series A FRN 3)
  • Corrected Modbus TCP data validation while insufficient data is received. Received packet with insufficient data is discarded.(X8-M Series A FRN 3)
  • Corrected User Watchdog Fault by MSG instruction while OLE.(X8-M Series A FRN 3)
  • Corrected Ethernet receive or transmit buffer underrun.(X8-M Series A FRN 3)
  • Corrected Missing packet in Ethernet packet receiver.(X8-M Series A FRN 3)
  • Corrected timing accuracy of timer for the Serial drivers.(X8-M Series A FRN 3)
  • Corrected INV instruction within MCR zone.(X8-M Series A FRN 3)
  • Corrected SR2.71, Program ID for Memory Card.(X8-M Series A FRN 3)
  • Corrected Ethernet receive or transmit buffer underrun. This issue was caused by the Socket MSG.(X8-M Series A FRN 3)
  • Corrected TCP sequence number handling issue.(X8-M Series A FRN 3)
  • Corrected missed transmit packets over Ethernet.(X8-M Series A FRN 3)
  • Corrected Socket MSG connection handling on extremely high network traffic.(X8-M Series A FRN 3)
  • Fixed Connection completed counter in Socket MSG.(X8-M Series A FRN 3)
  • Fixed the bit configuration in Modbus Slave Serial driver.(X8-M Series A FRN 3)
  • Changed to detect pulling out of Ethernet connector in Socket MSG while waiting for timeout.(X8-M Series A FRN 3)
  • Corrected Time Toggle Bits, SR2.31 clearing.(X8-M Series A FRN 3)
  • Corrected operation of Apply All Parameters in Change Channel Configuration MSG instruction.(X8-M Series A FRN 3)
  • Corrected the error check for Virtual Expansion I/O modules.(X8-M Series A FRN 3)
  • Configuration download between CPU and Expansion I/O modules.(X8-M Series A FRN 3)
Prev WinGPC 4.16.0 [ENG] (for N/NX Plus)
Next V-Server & Tellus Lite
go top